Pump GWH-PE
The system is designed to be connected to showers, wash basins, kitchen sinks and all places where grey and wash water can’t run with the help of natural fall. The system consists of a durable collecting vessel, available in polyethylene (PE) or in stainless steel. At the front 2 inlet pipes 1" and 1 ½“ and a ventilation connection ½“ can be found. The discharge pump is our hard-wearing waste water pump F. On the inside of the collecting vessel there is a float switch. Due to the use of a pump with cutting wheel hair and kitchen leftovers are chopped and conveyed without any problems. The occurring waste water is disposed via a pressure pipe (1"). The integrated pressure lip valve contains a safety valve which prevents a flow back of waste water. The electric- mechanical control works the station up to a tilt angle of 45°.
Model | Item No. |
GWH 12V PE-Gehäuse | 4030000 |
GWH 24V PE-Gehäuse | 4030001 |
GWH 230V PE-Gehäuse | 4030231 |
Technical Drawing
Technical Data
Delivery rate max: | 70 l/min | |||
Delivery height max: | 5 m | |||
Suction height max: | ||||
Pressure max: | 0.5 bar | |||
Fuel tank capacity: | 13 l | |||
Engine performance: | 0.3 kW | |||
Voltages: | 12V - 400V | |||
Weight: | max. 7.5 kg | |||
Connections: | 1", 1 1/2" |
Spare Parts
Objekt | Anzahl | Artikel-Nr. | Beschreibung |
1 | 1 | 4030113 | Gehäuse mit Deckel GWH VA |
2 | 1 | 4030030 | Pumpe GWH kpl. 12V |
2 | 1 | 4030031 | Pumpe GWH kpl. 24V |
3 | 1 | 0111050 | Ventilflansch 1'' |
4 | 1 | 0111051 | Drucklippenventilgehäuse 1'' |
5 | 1 | 0101052 | Drucklippenventil Y2 Y10s M M50-FA GWH |
6 | 1 | 0111029 | Winkel 1'' i-i |
7 | 1 | 0111006 | Gummidichtung SBR67 |
8 | 1 | 4030018 | Mutter 2'' |
9 | 1 | 4030021 | Schwimmerschalter |
10 | 2 | 4030022 | Kabelverschraubung mit Biegeschutz |
11 | 1 | 4030015 | Kunstofftülle 1 1/2'' |
12 | 1 | 4030016 | Kunstofftülle 1'' |
13 | 1 | 4030017 | Kunstofftülle 1/2'' |
14 | 1 | 4030014 | Gehäuse für Schaltung |
15 | 1 | 0111024 | Deckel von Gehäuse für Schaltung |
16 | 1 | 0105013 | Relais 12V |
Repair Kits
Article-No. | |
Rep.-Kit GWH standard | 4030095.0 |
Content | |
2 x Shaft valve Y10 | 0111009 |
2 x Rubber seal SBR67 | 0111006 |
2 x Flange seal Y8-10/F12-24/Z60/IP50 | 0111007 |
2 x Pressure lip valve | 0101052 |
Article-No. | |
Rep.-Kit GWH master | 4030096.0 |
Content | |
2 x Shaft seal Y10 | 0111009 |
2 x Rubber seal SBR67 | 0111006 |
2 x Flange seal Y8-10/F12-24/Z60/IP50 | 0111007 |
1 x Pressure lip valve | 0101052 |
1 x Floating switch zu GWH LFL2-CK-U-PVC3 | 4030021.0 |
4 x O-ring 5 x 2,5 | 0101046 |